CV36 Automatic Wheel Clamp
  • CV36 Automatic Wheel Clamp
  • CV36 Automatic Wheel Clamp
  • CV36 Automatic Wheel Clamp as shown on MGE50

CV36 Automatic Wheel Clamp

£259.00
Tax excluded

Automatic wheel clamp for use with Motorcycle Lifts.

Quantity
In stock

  • Price shown does not include VAT or delivery - this is applied at checkout. 
For further information on delivery times etc please contact us or see our Deliveries and Returns page. Price shown does not include VAT or delivery - this is applied at checkout. For further information on delivery times etc please contact us or see our Deliveries and Returns page.
Previous
CV34 Wheel Clamp (High)
CV34 Wheel Clamp (High)
Next
CV38 Automatic Wheel Clamp
CV38 Automatic Wheel Clamp

The CV36 wheel clamp is designed to be used in conjunction with the MG lifts but can also be used with other lifts if holes are drilled in the lift table. The CV36 is supplied with a set of 4 mounting bolts and also with a quick-release kit for use with MGE50 & MGE75 lifts. This is particularly useful with the MGE75/F in-floor lift.

It will support wheels from 75mm to 220mm wide and will hold the bike upright - perfect for bikes without centre stands or where the side-stand allows the bike to lean over too far for safety.

Just push the bike into the wheel clamp and the clamp will automatically grab the tyre in 2 directions (front to back and side to side), automatically compensating for the width of the tyre. The bike is now supported upright.

The CV36 is not the same as similar looking clamps which are preset for a fixed width tyre - those are intended for end-users and owners of a particular bike. This is a professional clamping system intended for use in a professional environment where each bike is different. The clamp can be adjusted if you specialise in trail bikes or cruisers for example, but generally the standard range is sufficient.

One-person operation - ideal for larger unwieldy bikes.

CV36

You might also like